|
*Note, you must request access to the ISO Datastore from your ESX host if it is not currently available.
HPC Host is hosting a large range of ISO's for clients to install from.
You can access those ISO images by following these steps
Step 1
Open VMware Vsphere Client and select your virtual machine
Select Edit your Virtual Machine Settings
Note that the Virtual Machine is Powered down
Step 2
Click on CD/DVD Drive and select the Device Type : Datastore ISO file
Step 3
Click on Browse and select the Datastore DS3050Biso
Step 4
Browse the datastore until you found the ISO you are looking for.
I you do not find the ISO you need please contact support and HPC Host will upload it. *Note, requested uploads must be available ISOs we can both obtain and ensure that they have not been compromised.
Step 5
Select the ISO and hit OK.
Step 6
Check Connect at Power and Hit Ok to save the configuration and you can start installing your OS.
Step 7
Disconnect the ISO from your VM once you are finished. To disconnect the iso you will need to edit the VMs settings again and click on the CD/DVD Drive and select the bullet Client Device. Select OK to save the settings.
TIP:
If the boot process is too fast you can edit the virtual machine settings -> go to the Options TAB -> select the Boot Options under Advanced -> change the Power On Boot Delay to 10000
| 
